monoFab SRM-20 Specifications

Model SRM-20
Cuttable Material Modelling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Max, 130.75mm (5.15 in)
Loadable Workpiece Weight 2 kg (4.4 lb)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 6 - 1800mm/min
0.24 - 70.87inch/min
Software Resolution 0.01 mm/step (RML-1), 0.001mm/step (NC code)
0.000039 inches/step (RML-1), 0.000039 inches/step (NC code)
Mechanical Resolution 0.000998594 mm/step
0.0000393 inches/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3000 - 7000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240 V ±10%, 50/60 Hz
Power Consumption Approx. 50 W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
During standby: 45 dB (A) or less
External Dimensions 451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 19.6 kg (43.2 lb)
Installation Environment Temperature of 5 to 40°C (41 to 104 °F)
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cable, Cutting tool, Collet, Set screw, Spanners (7,10mm), Hexagonal wrench (size 2,3 mm), Positioning pins, Double-sided tape, Start-up page guidance card

Specifications, designs and dimensions listed may be subject to change without notice.