| Model |
DWX-4 |
| Cuttable Material |
Zirconia (pre-sintered), Wax, PMMA, Composite resin |
| Loadable workpiece shape |
Block |
76 (W) × 38 (D) x 10 to 22 (H) mm |
| PIN type |
Max. 85 (W) x 40 (D) x 22 (H) mm |
| Operating speed |
XYZ axis: 6 to 1800 mm/min. (0.24 to 70.8 in./min.) |
| Spindle motor |
Brushless DC motor |
| Spindle speed |
6000 to 30000 rpm |
| Rotary axis travel angle |
A: ±360° |
| Number of tools housed |
2 (option to increase to 4) |
| Attachable tool |
Shank diameter: 4 mm, Length: 40 to 55 mm |
| Compatible compressed air |
0.02 to 0.2 MPa |
| Interface |
USB |
| Control command set |
RML-1, NC code |
| Power requirements |
Voltage and frequency |
AC100 to 240 V ± 10 %, 50/60 Hz, 0.8 to 0.4 A (overvoltage category II, IEC 60664-1)
|
| Power consumption |
Approx. 70 W |
| Operating noise |
During operation: |
70 dB (A) or less (when not cutting) |
| During standby: |
40 dB (A) or less |
| External dimensions |
340 (W) × 365 (D) × 405 (H) mm (13.4 × 14.4 × 16.0 in.)
|
| Weight |
22 kg (48.5 lb) |
| Installation Environment |
Indoor Use, altitude: |
up to 2000 m |
| Temperature: |
5 to 40 °C (41 to 104 °F) |
| Relative humidity: |
35 to 80 % (no condensate) |
| Ambient pollution degree: |
2 (as specified by IEC 60664-1) |
| Short-Term Temporary Overvoltage: |
1440 V |
| Long-Term Temporary Overvoltage: |
490 V |
| Included items |
Power cable, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc. |
| System requirements for USB connection |
Operating system |
Windows® 7/8/8.1/10 (32 or 64 bit) |
| USB cable |
Use the included USB cable |
Specifications, designs and dimensions listed may be subject to change without notice.
